In our offer of equipment under MOST brand we have a new inverter power source for MIG/MAG, TIG DC and MMA coated electrode welding - Fanmig 502i.

The device is a modular weld fixture: power source is mounted on the cooler, on which is installed undercarriage. Separated wire feeder is connected to the standard power source using 5-meter composite cable. Other lengths of intermediate cables are available on request.

Fanmig 502i is designed for industrial welding. Welding current 500 A/40% for both, MIG/MAG welding and for coated electrode MMA welding, is appropriate for every user. The unit can be also used for electro-gouging. TIG DC welding in two options: normal or pulse. TIG arc ignition starts with the grinding of tungsten electrode on material (Liftarc).

Semi-automatic Fanmig 502i is a digitally controlled synergic device. After selecting the synergic mode and appropriate program mode, adjustment in one parameter generates changes in other parameters which are necessary for proper welding techniques.

MMA electrode welding can be conducted after selecting the right program, matching electrode types and diameters. In electrode welding, it is important to have device equipped with VRD function (turn-off option), which reduces the unloaded open circuit approximately to 20 V due to safety reasons. For MIG/MAG, MMA and TIG, it is possible turn off synergic mode and switch to the manual welding. Modern and easy to operate. Panel control and parameters’ displays are located on both, wire feeder and power source. Two knobs for setting the welding current and arc length in the front of the wire feeder. Welding program selection is performed on the modern panel, located in the middle of wire feeder. Liquid cooling system is situated at the bottom of the device, which prevents damage of power and electronic equipment in case of leakage. Liquid flow sensor, which protects the welding torch in case there is no coolant circulating.

The unit is characterized by ergonomic work program. Power source situated in the mandrel enables free rotation of the wire feeder. Short and thin shape of the wire feeder makes it suitable for welding in hard-to-reach places. On the device's side, there is a special shelf-hanger, e.g. for intermediate tool storage. Special socket connections which prevent intermediate cables from being pulled out of wire feeder’s or power source sockets. The device is equipped with wheels for easy carrying and transportation.

Assembling: The device is delivered in cardboard box with power source, cooler, trolley, wire feeder, earth cable, and intermediate cable (5 m).

Power supply cable provided with 32 CEE plug.

Accessories:

• welding torches – recommended torches MOST 501 SGRIP 3; 4 lub 5 m,
• rolls Ø 40 mm (page 16),
• water hose set 10 m - catalogue no. 51 00 024010,
• water hose set 15 m - catalogue no. 51 00 024015.